Status:questionable[:Event] - Keysight U2722A Programmer's Reference Manual

10 STATus Subsystem

STATus:QUEStionable[:EVENt]?

Syntax

STATus:QUEStionable[:EVENt]?

This query returns the value of the Questionable Status Event register. The Event
register is a read-only register, which stores (latches) all events that are passed by
the Questionable NTR and/or PTR filter. Reading the Questionable Status Event
register clears it.
For more information on the SCPI Status System, refer to
NOTE
system diagram"
Remarks
– The following table lists the bit definitions for the Questionable Status
Bit number
0 to 3 Not Used
4 OT
5 to 15 Not Used
– Once a bit is set, it remains set until cleared by reading the event register or
Returned Query Format
<NR1>
The returned value is the binary-weighted sum of all bits set in the register. For
example, if bit 4 is set, this query command will return "+16".
96
on page 21.
registers.
Decimal value
0
16
0
the clear status (*CLS) command.
Definition
0 is returned.
The over-temperature protection has tripped.
0 is returned.
Keysight U2722A/U2723A Programmer's Reference
Chapter 2, "Status