Basic Information About The Drive System; Parameters - Siemens SINAMICS S150 Operating Instructions Manual
Converter cabinet units 75 kw to 1200 kw
Hide thumbs
Also See for SINAMICS S150:
- Engineering manual (530 pages) ,
- Manual (312 pages) ,
- Function manual (108 pages)
Table of Contents
Advertisement
6.3
Basic information about the drive system
6.3.1
Parameters
Overview
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and by specific attributes (e.g. read, write, BICO
attribute, group attribute, and so on).
The parameters can be accessed via the following means:
● PC with the "STARTER" commissioning tool via PROFIBUS
● The user-friendly AOP30 Operator Panel
Parameter types
The following adjustable and visualization parameters are available:
● Adjustable parameters (write/read)
● Visualization parameters (read-only)
Figure 6-1
All these drive parameters can be read and changed via PROFIBUS using the mechanisms
defined in the PROFIdrive profile.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
These parameters have a direct impact on the behavior of a function.
Example: Ramp-up and ramp-down time of a ramp-function generator
These parameters are used to display internal variables.
Example: current motor current
Parameter types
6.3 Basic information about the drive system
Operation
173
Advertisement
Table of Contents
