Show Mpls Ldp Bindings - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show mpls ldp session
Peer Status
---------- ------------
10.1.1.2:0 OPERATIONAL
20.1.1.2:0 OPERATIONAL
Total Entries : 2
DXS-3600-32S#
Example
DXS-3600-32S#show mpls ldp session peer 10.1.1.2 detail
Peer : 10.1.1.2:0
Status : OPERATIONAL
Role : Active
Keep Alive(Sec) : 40
Remain Time(Sec) : 20
Create Time : 2009-12-1 14:10:30
Distribution Method: DU
Loop Detection : Enabled
Path Vector Limit : 255
Max PDU Length : 1500
Address List : 10.1.1.2
Total Entries: 1
DXS-3600-32S#
Example
DXS-3600-32S#show mpls ldp session peer 10.1.1.2 statistic
Peer 10.1.1.2
-------------------------------------------
Notification Message
Initialization Message
Keep Alive Message
Address Message
Address Withdraw Message : TX 0/RX 0
Label Mapping Message
Label Request Message
Label Withdraw Message
Label Release Message
Label Abort Message
Total Entries: 1
DXS-3600-32S#

38-37 show mpls ldp bindings

This command is used to display all LDP label binding information.
show mpls ldp bindings
Parameters
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display all LDP session information.
Role Keep Alive
-------- ----------- ------------------
Active 40(Sec)
Passive 40(Sec)
This example shows how to display LDP session detailed information for peer
10.1.1.2.
172.18.1.1
This example shows how to display LDP session statistics for peer 10.1.1.2.
: TX 10/RX 2
: TX 2/RX 2
: TX 100/RX 100
: TX 1/RX 1
: TX 2/RX 1
: TX 2/RX 1
: TX 0/RX 0
: TX 0/RX 0
: TX 0/RX 0
None.
Distribution Mode
DU
DU
366