D-Link DXS-3600-16S Manual page 271

show ip igmp groups [group group-address | interface ifname] [{detail | static}]
Parameters
group-address
ifname
static
detail
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip igmp groups
Interface Multicast Group
------------ ---------------
vlan1 228.0.0.1
vlan1 228.0.0.2
vlan1 228.0.0.3
vlan1 228.0.0.4
vlan1 228.0.0.5
vlan1 228.0.0.6
vlan1 228.0.0.7
vlan1 228.0.0.8
vlan1 228.0.0.9
vlan1 228.0.0.10
vlan1 239.255.255.250
Total Entries: 11
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the address of the multicast group. This is a multicast IP address in four-
part dotted-decimal notation.
Specifies the interface name.
Shows the static group information, as specified with the ip igmp static-group
command.
Shows the detailed information.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
Use this command without any parameters to show group address, interface type,
and information about all the multicast groups directly connected to the interface.
Information about a specific group is displayed if a group address is added to the
command.
This example shows information about all the groups.
Uptime
----------
00:00:17
00:00:16
00:00:16
00:00:15
00:00:15
00:00:14
00:00:14
00:00:13
00:00:13
00:00:12
00:00:05
Group timer Last Reporter
----------- --------------
00:04:18 10.1.4.25
00:04:19 10.1.4.25
00:04:19 10.1.4.25
00:04:15 10.1.4.25
00:04:15 10.1.4.25
00:04:16 10.1.4.25
00:04:16 10.1.4.25
00:04:17 10.1.4.25
00:04:17 10.1.4.25
00:04:18 10.1.4.25
00:04:15 10.0.0.24
263