Show Ip Igmp Groups - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show ip igmp interface
Interface vlan1
Internet Address is 10.90.90.90/8
IGMP is disabled on interface
Current IGMP router version is 2
IGMP query interval is 120 seconds
IGMP querier timeout is 0 seconds
IGMP max query response time is 20 seconds
Robustness variable is 3
Last member query interval is 20 seconds
IGMP check subscriber source network state is disabled
IGMP snooping is globally disabled
IGMP snooping is disabled on this interface
IGMP snooping fast-leave is disabled on this interface
IGMP snooping querier is disabled on this interface
Total Entries: 1
DXS-3600-32S#
Display Parameters
Internet address is
IGMP is disabled on
interface
Current IGMP router version
is
IGMP query interval is
IGMP querier timeout is
IGMP max query response
time is
Robustness variable is
Last member query interval
is
IGMP check subscriber
source network state is
IGMP snooping is globally
IGMP snooping is
IGMP snooping fast-leave is
IGMP snooping querier is

23-10 show ip igmp groups

This command is used to show the groups directly connected to the device and the group information learnt from IGMP.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the information of all the interfaces.
Description
Internet address of the interface and subnet mask being applied to the interface, as
specified with the ip address command.
Indicates whether IGMP is active on the interface. The IGMP state will be
automatically enabled when any multicast routing protocol (PIM or DVMRP) turns
active, and be disabled if no any multicast routing protocol is active on the interface.
The IGMP running version on the interface, as specified with the ip igmp version
command.
Interval of the IGMP query message, as specified with the ip igmp query-interval
command.
The querier role expiring time. If this timer is running, there's other IGMP querier on
this LAN.
Indicates the maximum allowed time before the host sending a responding report, as
specified with the ip igmp query-max-response-time command.
Indicates the robustness value, as specified with the ip igmp robustness-variable
command.
Indicates the interval of the switch sending last member query, as specified with the
ip igmp last-member-query-interval command.
Indicates IGMP will check whether the source IP of the received report/leave is in the
same subnet with the receiving interface, as specified with the ip igmp check-
subscriber-source-network command.
Indicates the IGMP snooping global state, as specified with the ip igmp snooping
command.
Indicates the IGMP snooping interface state, as specified with the ip igmp
snooping vlan command.
Indicates the IGMP snooping fast-leave state, as specified with the ip igmp
snooping fast-leave command.
Indicates the IGMP snooping querier state is disabled, as specified with the ip igmp
snooping querier command.
262