Command Mode - D-Link DXS-3600-16S Manual

Default

Command Mode

Command Default Level
Usage Guideline
Example
DXS-3600-32S#show dot1x
802.1X
Forward EAPOL PDU
Max User
DXS-3600-32S#
Example
DXS-3600-32S#show dot1x interface tenGigabitEthernet 1/0/1 auth-configuration
Interface : TenGigabitEthernet1/0/1
Capability : None
AdminCrlDir : Both
OperCrlDir : Both
Port Control : Auto
QuietPeriod : 60
TxPeriod : 30
SuppTimeout : 30
ServerTimeout : 30
MaxReq : 2
ReAuthPeriod : 3600
ReAuthenticate : Disabled
Forward EAPOL PDU On Port : Disabled
Max User On Port : 16
DXS-3600-32S#
Example
DXS-3600-32S#show dot1x auth-state
Status: A - Authorized; U - Unauthorized; (P): Port-Based 802.1X;Pri:Priority
Interface
------------------------- ----------------- ---
TenGigabitEthernet1/0/1
TenGigabitEthernet1/0/1
TenGigabitEthernet1/0/1
TenGigabitEthernet1/0/2
TenGigabitEthernet1/0/3
TenGigabitEthernet1/0/14
Total Authenticating Hosts :2
Total Authenticated Hosts
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Privileged EXEC Mode.
Level: 15
Use this command display the IEEE 802.1X global configuration, interface
configuration, authentication state, statistics, diagnostics, and session statistics.
When no interface is specified, information about all interfaces will be displayed.
This example shows how to display the 802.1X global configuration.
: Disabled
: Disabled
: 4096
This example shows how to display the 802.1X configuration for the interface
TenGigabitEthernet1/0/1.
sec
sec
sec
sec
times
sec
This example shows how to display the 802.1X authentication state.
MAC Address
00-00-00-00-00-01 10
00-00-00-00-00-02 10
00-00-00-00-00-04 30
- (P) -
- (P) -
- (P) -
:2
Auth PAE State
VID
-------------- ------------- ------ ---- ---
Authenticated
Authenticated
Authenticating Response
Authenticating Request
Connecting
Held
14
Backend State Status VID
Idle A
Idle A
U
U
Idle U
Fail U
Pri
4004 3
1234 -
- -
- -
- -
- -