D-Link DXS-3600-16S Manual page 543

Parameters
MAP-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show route-map rmap1
route-map : rmap1
--------------------------
sequence : 10
Match clauses:
as-path :
community :
interface :
ip address :
ip next-hop :
route-source :
metric :
route-type :
Set clauses:
dampening :
DXS-3600-32S#
Display Parameters
Route Map
Sequence
Match
Set
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies to display information about specified route map. The maximum
length is 16 characters.
None.
Privileged Mode.
Level: 3
Use this command to check the settings of route map, including permit or deny
clauses and match or set commands.
This example shows information of route map "rmap1".
(Permit)
PATH_AC
ALPHA-COMMUNITY exact
System
Strict-Control
Strict-Control
LocalServer
5
internal
14 500 900 60 15
Description
The name of route map. It is specified with the command route-map.
The sequence number of clause. It is specified with the command route-map.
List of match commands.
List of set commands.
535