Alternate Store And Forward (Asf) Commands - D-Link DXS-3600-16S Manual

Alternate Store and Forward (ASF) Commands

5-1 enable asf
This command is used to enable the ASF feature.
enable asf
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#enable asf
DXS-3600-32S(config)#
5-2 no asf
This command is used to disable the ASF feature.
no asf
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no asf
DXS-3600-32S(config)#
5-3 show asf
This command is to display the current ASF mode.
show asf
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Alternate store and forward feature is disabled.
Global Configuration Mode
Level: 15
Use this command to enable the alternate store and forward mode.
This example shows how to enable ASF.
None.
Alternate store and forward feature is disabled.
Global Configuration Mode
Level: 15
Use this command to disable the alternate store and forward mode.
This example shows how to disable ASF.
None.
None.
Privileged Mode.
Level: 1
Use this command to display the current setting of the alternate store and forward
feature.
46