D-Link DXS-3600-16S Manual page 570

Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#spanning-tree mst configure
Success
DXS-3600-32S(config-mst)#name region1
Success
DXS-3600-32S(config-mst)#
13 2000-02-15 00:56:55 INFO(6) Spanning Tree MST configuration ID name and revision level
change (name:region1 revision level:0)
DXS-3600-32S(config-mst)#
57-10 revision_level
This command is used to set the revision number for the MST configuration. To return to the default settings, use the
no form of this command.
revision_level REVISION
no revision_level
Parameters
REVISION
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#spanning-tree mst configure
Success
DXS-3600-32S(config-mst)#revision_level 2
Success
DXS-3600-32S(config-mst)#
14 2000-02-15 01:00:08 INFO(6) Spanning Tree MST configuration ID name and revision level
change (name:region1 revision level:2)
DXS-3600-32S(config-mst)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Two or more switches with the same VLAN mapping and configuration version
number are considered to be in different MST regions if the region names are
different.
Caution: Be careful when using the name command to set the name of an MST
region. If you make a mistake, you can put the switch in a different region. The
configuration name is a case-sensitive parameter.
This example shows how to configure the MSTP configuration name to 'region1'.
Specifies the same given name with different revision level also represents for
different MST region. The range is 0 to 65535.
Default value for revision-level is 0.
MST Configuration Mode
Level: 8
Two or more switches that have the same configuration but different revision
numbers are considered to be part of two different regions.
Caution: Be careful when using the revision command to set the revision number of
the MST configuration because a mistake can put the switch in a different region.
This example shows how to configure the revision level of MSTP configuration to 2.
562