Import Map - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# router rip
DXS-3600-32S(config-router)# address-family ipv4 vrf VPN-A
DXS-3600-32S(config-router-af)#network 10.1.1.0
DXS-3600-32S(config-router-af)#exit-address-family
DXS-3600-32S(config-router)#

72-3 import map

This command is used to configure the import route map of one VRF. Use the no form of this command to delete the
import route map.
import map route-map
no import map
Parameters
route-map
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# ip vrf VPN-A
DXS-3600-32S(config-vrf)# import map rmap1
DXS-3600-32S(config-vrf)#
72-4 ip vrf
This command is used to create a new VRF instance. Use the no form of this command to delete one VRF instance.
ip vrf vrf-name
no ip vrf vrf-name
Parameters
vrf-name
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to exit the address family configuration mode.
Specifies the name of import route map of the VRF.
By default, no import route map is specified to a VRF instance.
VRF Configuration Mode.
Level: 15.
This command is used to set the import route map of one VRF. This is used by BGP
to distribute VPN routing information. One VRF only has one import route map. The
new import route map will overwrite the value set before.
Use the command show ip vrf to check the settings.
This example shows how to create a VRF VPN-A and set its import route map.
Specifies the name of the VRF.
By default, no VRF instance is specified.
Global Configuration Mode.
Level: 15
654