D-Link DXS-3600-16S Manual page 142

Display Parameters
Suppress Value
MAX Suppress Time
Unreachable route's Half-life Specifies the time (in minute) after which the penalty of the unreachable routes will
7-79 show ip bgp dampening flap-statistics
This command is used to display BGP flap statistics.
show ip bgp dampening flap-statistics [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp dampening flap-statistics
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i –internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network
*d 10.0.0.0/8
*d 10.2.0.0/16
DXS-3600-32S#
Example
DXS-3600-32S#show ip bgp dampening flap-statistics vrf VPN-A
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i –internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network
*d 10.0.0.0/8
*d 10.2.0.0/16
DXS-3600-32S#
Display Parameters
BGP Local Router ID
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
A route is suppressed when its penalty exceeds this limit. The default setting is 2000.
Maximum time (in minutes) a route can be suppressed. The default setting is 45
minutes.
be down, by half. The default setting is 15 minutes.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to show flap entries in the BGP routing table.
This example shows how to display the flap entries in the BGP routing table.
From
172.29.232.177
172.29.232.177
To display the flap entries in the BGP routing table, use the show ip bgp
dampening flap-statistics vrf command in privileged mode.
From Flaps
172.29.232.177 4
172.29.232.177 4
Description
The router identifier of the local BGP router.
Flaps Duration
4 00:13:31
4 00:02:45
Duration Reuse
00:13:31 00:18:10
00:02:45 00:28:20
134
Reuse Path
00:18:10 100i
00:28:20 100i
Path
100i
100i