D-Link DXS-3600-16S Manual page 254

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mac-address-table filtering 00:00:00:0A:12:EE vlan 4
DXS-3600-32S(config)#
21-5 mac-address-table notification
This command is used to enable and configure the MAC address notification function. Use the no form of the command
to disable the function or set the optional configuration to default.
mac-address-table notification [interval SECONDS | history-size VALUE]
no mac-address-table notification [interval | history-size]
Parameters
interval SECONDS
history-size VALUE
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mac-address-table notification
DXS-3600-32S(config)#mac-address-table notification interval 10
DXS-3600-32S(config)#mac-address-table notification history-size 500
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Global Configuration Mode.
Level: 12
Only a unicast MAC address can be specified for the entry.
An error message "The specified VLAN does not exist." will be displayed if the
specified VLAN does not exist.
An error message "The specified entry does not exist." will be displayed if the user
tries to remove an entry that does not exist.
This example shows how to add the filtering address 00:00:00:0A:12:EE to the MAC
address table. The user also specifies that when any packet received on VLAN 4
that has a destination MAC address of "00:00:00:0A:12:EE" will be dropped.
Specifies the interval of sending the MAC address trap message, the default is 1
second.
Specifies the maximum number of the entries in the MAC address notification table,
The range is 0 to 500; the default is 50 entries.
MAC address notification is disabled, the interval is 1 second, and history-size is 50
entries.
Global Configuration Mode.
Level: 12
Whenever the switch learns or removes a MAC address, an SNMP notification can
be generated and sent to the SNMP server. The MAC notification history table stores
the MAC address learned or delete for each hardware port for which the trap is
enabled.
This example shows how to enable MAC address notification, and set interval to 10
seconds, history-size to 500 entries.
246