D-Link DXS-3600-16S Manual page 419

Usage Guideline
Example
DXS-3600-32S#debug ip ospf timer
DXS-3600-32S#
Start Hello timer at interface 10.90.90.90 tic 20
Wait timer expired at interface 10.90.90.90 tic 100
40-40 debug ip ospf virtual-link
This command is used to turn on the OSPF virtual link debug switch. Use the no form of the command to turn off the
OSPF virtual link debug switch.
debug ip ospf virtual-link
no debug ip ospf virtual-link
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf virtual-link
DXS-3600-32S#
Virtual link up transit area 1.1.1.1 vnbr 3.3.3.3 tic 260
40-41 debug ip ospf route
This command is used to turn on the OSPF route debug switch. Use the no form of the command to turn off the OSPF
route debug switch.
debug ip ospf route
no debug ip ospf route
Parameters
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Use this command to turn on or turn off OSPF timer debug switch. When the event
related to OSPF timer happens, the debug information will be print if OSPF debug
function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF timer debug switch.
None.
By default, the OSPF virtual link switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF virtual link debug switch. When the
event related to OSPF virtual link happens, the debug information will be print.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF virtual link debug switch.
None.
By default, the OSPF route switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
411