D-Link DXS-3600-16S Manual page 124

7-67 show ip as-path access-list
This command is used to display configured AS-path access-lists.
show ip as-path access-list [ACCESS-LIST-NAME]
Parameters
ACCESS-LIST-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip as-path access-list
BGP AS Path Access List: a1
permit
deny
Total Filter Entries: 2
BGP AS Path Access List: a2
permit
deny
Total Filter Entries: 2
BGP AS Path Access List: a3
permit
Total Filter Entries: 1
Total AS Path Access List Number: 3
DXS-3600-32S#
Display Parameters
BGP AS Path Access List
permit
deny
Total Filter Entries
Total AS Path Access List
Number
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the access list to be displayed. The length is up to 16
characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
This command can be used without any arguments or keywords. If no arguments are
specified, this command will display all AS-path access-lists. However, when the AS-
path access-list name is specified when entering the show ip as-path access-list
command. This option can be useful for filtering the output of this command and
verifying a single named AS-path access-list.
This example shows how to display the content of IP AS-path access-list.
^300$
^200$
3*0$
20
1
Description
Indicates the name of the BGP AS path access list.
Indicates that the packets will be accepted if there AS-PATH attribute match the
regular expression specified.
Indicates that the packets will be rejected if there AS-PATH attribute match the
regular expression specified.
Indicates the total number of entries of a specifically AS path access list.
Indicates the total number of the AS path access lists.
116