D-Link DXS-3600-16S Manual page 157

Example
DXS-3600-32S#show ip bgp reflection
Client to Client Reflection State : Disabled
Cluster ID: 0.0.0.0
Route Reflector Client:
peer group: inter (172.18.10.1)
172.18.10.3
172.18.10.4
172.18.10.5
DXS-3600-32S#
Display Parameters
Client to Client Reflection
State
Cluster ID
Route Reflector Client
peer group
7-86 show ip bgp route-map
This command is used to display networks which match route-map of Border Gateway Protocol.
show ip bgp route-map [{all | rd ASN:NN | vrf VRF-NAME}] MAP-NAME
Parameters
all
rd ASN:NN
vrf VRF-NAME
MAP-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp route-map my
BGP Local Router ID is 10.90.90.90
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask
*> 10.0.0.0/8
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the reflection configuration of BGP.
Description
Indicates the state of the route client to client reflection.
Indicates the cluster ID of the local route reflection.
Clients of the local route reflector, including peer group clients list and the individual
clients list by IP addresses below.
Indicates the name of the peer group with the peer group members in the
parentheses separated by comma.
(Optional) Specifies to display routes of all VPN and VRFs.
(Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Specifies the name of a route map. The maximum length is 16 characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
This command displays the networks according to the specified route-map.
This example shows the output from the show ip bgp route-map command, in
privileged mode.
Gateway
0.0.0.0
Metric LocPrf
0 100
149
Weight Path
32768 i