Show Ip Bgp Redistribute - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show ip bgp network
Network Address
----------------------------------------------
20.0.0.0/24
Total Network Number:
DXS-3600-32S#
Display Parameters
Network Address
Route Map
Total Network Number

7-84 show ip bgp redistribute

This command is used to display the route redistribution configuration of BGP.
show ip bgp redistribute [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp redistribute
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
LOCAL BGP
Total Entries : 1
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output from the show ip bgp network command in,
privileged mode.
Route Map
-
1
Description
BGP prefix created by command of network <network-address>.
Specify the route-map of this network to apply.
The number of BGP network.
(Optional) Specifies the name of the VRF to display the route redistribution
configuration in the IPv4 VRF address family.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to check the route redistribution configuration about BGP.
This example shows how to display the redistribution configuration of BGP:
Type Metric
-------- ------
All 0
RouteMapName
------------
N/A
147