D-Link DXS-3600-16S Manual page 551

v3
auth
noauth
priv
read READ-VIEW
write WRITE-VIEW
notify NOTIFY-VIEW
Default
Group Name Version
initial SNMPv3
public SNMPv1
public SNMPv2c
private SNMPv1
private SNMPv2c
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#snmp-server group test v1
DXS-3600-32S(config)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no snmp-server group test
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies that SNMPv3 should be used for the group. SMNPv3 is the most secure of
the supported security models, as it allows you to explicitly configure the
authentication characteristics.
Specifies authentication of a packet without encrypting it.
Specifies no authentication of a packet.
Specifies authentication of a packet with encryption.
(Optional) Specifies a read view for the SNMP group. The read-view argument
represents a string that is the name of the view that enables you to view only the
contents of the agent.
(Optional) Specifies a write view for the SNMP group. The write-view argument
represents a string that is the name of the view that enables you to enter data and
configure the contents of the agent.
(Optional) Specifies a notify view for the SNMP group. The notify-view argument
represents a string that is the name of the view that enables you to specify a notify,
inform, or trap.
No default access control list is associated with any group.
The default settings of SNMP group are as following:
Security Level
noauth
noauth
noauth
noauth
noauth
Global Configuration Mode.
Level: 12
An SNMP group defines the access method, the read view, the write view, and the
notification view.
For the access method, it means that when the user who belongs to this group must
use the version, access method (for V3) to access the SNMP agent.
For the read view, it means that the user who belongs to this group can only read
objects that fall in this view. For the write view, it means that the user who belongs to
this group can only write objects that fall in this view. The access to objects range out
of the view will get error messages.
For the notification view, it means that the system will check whether the trap
manager owns the view to the binding objects associated with the notification
packet. The notification will not sent to a trap manager if it does not own the
notification view to the binding objects.
This example shows how to create SNMP group test with SNMPv1.
This example shows how to remove snmp group test.
Read View Write View
Name Name
restricted None
CommunityView None
CommunityView None
CommunityView CommunityView
CommunityView CommunityView
543
Notify View
Name
restricted
CommunityView
CommunityView
CommunityView
CommunityView