D-Link DXS-3600-16S Manual page 596

Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#logging count
DXS-3600-32S(config)#
60-8 clear logging
This command is used to clear the logs from the buffer.
clear logging
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clear logging
DXS-3600-32S(config)#
60-9 show logging
This command is used to display the logs in the buffer.
show logging
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Level: 15
This command enables the log statistics function. The statistics begins when the
function is enabled. If you run no logging count, the statistics function is disabled and
the statistics data is deleted.
This example shows how to enable the log statistics function.
None.
None.
Global Configuration Mode.
Level: 15
This command clears the log packets from the memory buffer. You cannot clear the
statistics of the log packets.
This example shows how to clear the log packets from the memory buffer.
None.
None.
EXEC Mode.
Level: 15
This command only allows you to view the log files. You cannot use this command to
view other non-log files.
588