D-Link DXS-3600-16S Manual page 62

Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#aaa accounting exec list-1 start-stop group radius
DXS-3600-32S(config)#line console
DXS-3600-32S(config-line)#accounting exec list-1
DXS-3600-32S(config-line)#
6-10 ip http authentication aaa
This command is used to specify an AAA authentication method for HTTP server users, use the ip http authentication
aaa command in global configuration mode. To disable a configured authentication method, use the no form of this
command.
ip http authentication aaa {exec-authorization {default | list-name} | login-authentication {default | list-name}}
no ip http authentication aaa {exec-authorization | login-authentication}
Parameters
exec-authorization
login-authentication
default
listname
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Once the default exec accounting method list has been configured, it is applied to all
terminals automatically. Once the non-default exec accounting method list has been
configured, it is applied to the line instead of the default method list. If you attempt to
apply an undefined method list, a warning message will prompt that the exec
accounting in this line is ineffective till the exec accounting command method list is
defined.
This example shows how to configure the EXEC accounting method list, with the
name of 'list-1', that uses the RADIUS server. If the security server does not
response, it will not perform accounting. After the configuration, EXEC accounting is
applied to the console.
After applying the login method list, 'list-1', to the console, when a user logs in from
the console, it sends the account start information to the security server when the
user has logged into the NAS's CLI. It also sends the account stop information to the
security server when a user logs out.
Specifies to configure the method list for exec authorization.
Specifies to configure the method list for login authentication.
Specifies to configure the default method list.
Specifies to configure the name of the method list.
None.
Global Configuration Mode.
Level: 15
The 'ip http authentication aaa' command specifies the AAA authentication method
to be used for login when a client connects to the HTTP server. The local, RADISU
and TACACS+ methods should be specified using the 'aaa authentication login'
command.
54