Authentication, Authorization, And Accounting (Aaa) Commands - D-Link DXS-3600-16S Manual

Authentication, Authorization, and Accounting (AAA)
Commands
6-1 aaa
This command is used to enable the Authentication, Authorization, and Accounting (AAA) security service. The no form
of this command is used to disable the AAA security service.
aaa
no aaa
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#aaa
DXS-3600-32S(config)#
7 2011-11-14 11:55:14 INFO(6) Authentication Policy is enabled (Module: AAA)
DXS-3600-32S(config)#
6-2 aaa authentication login
This command is used to enable AAA login authentication and configure the login authentication method list. The no
form of this command is used to delete the authentication method list.
aaa authentication login {default | list-name} method1 [method2...]
no aaa authentication login {default | list-name}
Parameters
default
list-name
method
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
By default, this feature is disabled.
Global Configuration Mode.
Level: 15
Use this command to enable AAA. If AAA is not enabled, none of the AAA
commands can be configured.
This example shows how to enable the AAA security service.
When this parameter is used, the following defined authentication method list is used
as the default method for Login authentication.
Name of the user authentication method list. After the user-defined authentication
method list created, you can use login authentication line configuration command to
apply the login authentication method list to the specified terminal lines.
Syntax "{local | none | group {radius | tacacs+ | group_name}}".
Up to four methods supported:
local - Use the local user name database for authentication.
none - By pass authentication.
group - Can be followed by radius or tacas+ or a group_name
"group radius" means use all RADIUS servers group
"group tacacs+" means use all TACACS+ server group.
"group group_name" is the specific group created via aaa group server global
configuration command.
None. On the console, login will succeed without any authentication checks if the
login authentication method list is not set.
Global Configuration Mode.
Level: 15
48