Show Ip Igmp Snooping Groups - D-Link DXS-3600-16S Manual

Display Parameters
Querier Role
Querier IP
Querier Expiry Time

24-13 show ip igmp snooping groups

This command is used to display IGMP Snooping dynamic group information.
show ip igmp snooping groups [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip igmp snooping groups
IGMP Snooping Connected Group Membership:
VLAN ID Group address
------- ---------------
1 232.0.0.1
1 232.0.0.1
1 232.0.0.1
Total entries: 3
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
The querier role of the querier electing. It can be Querier or Non-Querier. Querier
means the local switch is selected as IGMP querier on the VLAN, and Non-Querier
means the local switch is not selected as IGMP querier.
The querier's IP address on this VLAN.
The elected querier expiring time. "-" means the local switch is querier, and it won't
be expired.
Specifies the group IP address you want to display. If no group address specified, all
IGMP group information will be displayed.
Specifies the VLAN ID. Display the specified VLAN information.
None.
Privileged EXEC Mode.
Level: 3
This command is used to display IGMP Snooping dynamically learned group
information.
This example shows how to display the IGMP Snooping group information of all
VLANs.
Source address
---------------
192.168.1.11
192.168.1.12
*
FM Exp(sec) Interface
-- -------- ---------
IN 258 1/0/21
EX 244 1/0/11
IN 258 1/0/21
EX 244 1/0/11
EX 244 -
275