Show Mpls Ldp Session - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show mpls ldp neighbor
Peer : 202.11.1.1:0
--------------------------------------
Protocol Version
Transport address
Keep Alive Time
Distribution Method : DU
Loop Detect
Path vector limit
Max PDU Length
Peer : 192.1.1.1:0
--------------------------------------
Protocol Version
Transport address
Keep Alive Time
Distribution Method : DU
Loop Detect
Path vector limit
Max PDU Length
Peer : 202.20.1.1:0
--------------------------------------
Protocol Version
Transport address
Keep Alive Time
Distribution Method : DU
Loop Detect
Path vector limit
Max PDU Length
Total Entries : 3
DXS-3600-32S#

38-36 show mpls ldp session

This command is used to display LDP session information.
show mpls ldp session [peer IP-ADDRESS] [{detail | statistic}]
Parameters
peer IP-ADDRESS
detail
statistic
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display LDP neighbor information.
: 1.0
: 202.11.1.1
: 40 (sec)
: Disabled
: 0
: 1500
: 1.0
: 192.1.1.1
: 40 (sec)
: Disabled
: 1500
: 0
: 1.0
: 202.20.1.1
: 40 (sec)
: Disabled
: 0
: 1500
Specifies the IP address used as the peer LSR ID. If not specified, display all
sessions.
Specifies to display detailed information.
Specified to session statistics.
None.
EXEC Mode.
Level: 3.
This command is used to display LDP session information.
365