Using Show Commands - D-Link DWS-1008 User Manual

DWS-1008 User's Manual
DWS-1008# copy 0000000001 tftp://192.168.253.11/log-file
Clearing the Trace Log
To clear all messages from the trace log buffer, type the following command:
DWS-1008# clear log trace
List of Trace Areas
To see all MSS areas you can trace, type the following command:
DWS-1008# set trace ?

Using Show Commands

To troubleshoot the switch, you can use show commands to display information about
different areas of the MSS. The following commands can provide helpful information if you
are experiencing MSS performance issues.
Viewing VLAN Interfaces
To view interface information for VLANs, type the following command:
DWS-1008# show interface
* = From DHCP
VLAN Name
--------------------------------------------------------------------------------------------------------------------
1 default
130 vlan-eng
190 vlan-wep
Viewing AAA Session Statistics
To view AAA session statistics, type the following command:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=5 key=(null) author-pass=(null)
Radius Servers
Server
-----------------------------------------------------------------------------------------------
SQA2BServer
SideShow
D-Link Systems, Inc.
Address
0.0.0.0
192.168.12.7
192.168.19.7
Addr Ports
11.1.1.11 1812 1813
192.168.0.21 1812 1813
Mask Enabled
0.0.0.0 NO
255.255.255.0 YES
255.255.255.0 YES
T/o Tries Dead State
5 3 5
5 3 0
Appendix A - Troubleshooting
State RIB
Down ipv4
Up ipv4
Up ipv4
UP
UP
391