Show Ip Igmp Snooping - D-Link DXS-3600-16S Manual

Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clear ip igmp snooping statistics
DXS-3600-32S(config)#

24-11 show ip igmp snooping

This command is used to display the IGMP Snooping related configurations.
show ip igmp snooping [vlan VLAN-ID]
Parameters
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip igmp snooping
IGMP Snooping Global State
Dynamic Mrouter Aging Time
VLAN #1 Configuration
IGMP Snooping State
Fast Leave
Querier State
Version
Query Interval
Max Response Time
Total Entries: 1
DXS-3600-32S#
Example
DXS-3600-32S#show ip igmp snooping vlan 1
IGMP Snooping State
Fast Leave
Querier State
Version
Query Interval
Max Response Time
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command is used to clear IGMP Snooping statistics counter.
This example shows how to clear the IGMP Snooping statistics counter.
Specifies the VLAN ID. Display information on the specified VLAN. The range is 1 to
4094.
None.
Privileged EXEC Mode.
Level: 3
This command is used to display IGMP Snooping related configurations. If no
parameter is specified, this command will display IGMP Snooping configurations on
all VLANs.
This example shows how to display the IGMP Snooping configurations on all VLANs.
: Enabled
: 300 seconds
: Disabled
: Disabled
: Disabled
: V3
: 125 seconds
: 10 seconds
This example shows how to display the IGMP Snooping configurations on VLAN 1.
: Disabled
: Disabled
: Disabled
: V3
: 125 seconds
: 10 seconds
273