Example
DXS-3600-32S#show radius-server configuration
IP-Address
Auth-Port Acct-Port Key
-----------------------------------------------------------------------------
192.168.12.1
1812
Default Key:aaa
Default Retransmit:4
Default Timeout:10
1 RADIUS server(s) in total
DXS-3600-32S#
Display Parameters
IP-Address
Auth-Port
Acct-Port
Key
Retransmit
Timeout
Default Key
Default Retransmit
Default Timeout
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output for the show RADIUS authentication & accounting
server hosts command.
1813
Description
IP address of the RADIUS security server host.
UDP port used for RADIUS authentication.
UDP port used for RADIUS accounting.
A shared password for the network access server (device) to communicate with the
RADIUS security server.
The number of packet retransmissions before the device considers that the RADIUS
security server does not respond.
Set the time for the device to wait for a response from the security server after
retransmitting the RADIUS packet. The unit is seconds.
A default shared password for the network access server (device) to communicate
with the RADIUS security server
The default number of packet retransmissions before the device considers that the
RADIUS security server does not respond.
The default time for the device to wait for a response from the security server after
retransmitting the RADIUS packet.
Retransmit Timeout
501