D-Link DXS-3600-16S Manual page 610

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#boot system flash firmware.had
DXS-3600-32S(config)#
65-3 show bootup
This command is used to display the boot up file information.
show bootup
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show bootup
Bootup Firmware : /c:/runtime.had
Bootup Configuration : /c:/y
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Global Configuration Mode.
Level: 15
By default, the switch attempts to automatically boot the system using the
information in the BOOT environment variable. If this variable is not set, the switch
attempts to load and execute the first executable image.
This example shows how to configure the 'firmware.had' file as the boot up image.
None.
None.
Privileged EXEC Mode.
Level: 3
Used to display the boot up file information.
This example shows how to display the boot up file information.
602