D-Link DXS-3600-16S Manual page 40

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

3-16 mac access-group
This command is used to apply a specific MAC ACL to an interface. Use the no command to cancel the application.
mac access-group {id | name} {in | out}
no mac access-group {id | name} {in | out}
Parameters
id
name
in
out
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface range tenGigabitEthernet 1/0/1-1/0/3
DXS-3600-32S(config-if-range)#mac access-group ext_mac out
DXS-3600-32S(config-if-range)# end
DXS-3600-32S# show access-group interface tenGigabitEthernet 1/0/1-1/0/3
Interface tenGigabitEthernet 1/0/1:
mac access-group ext_mac out
Interface tenGigabitEthernet 1/0/2:
mac access-group ext_mac out
Interface tenGigabitEthernet 1/0/3:
mac access-group ext_mac out
DXS-3600-32S#
3-17 expert access-group
This command is used to apply a specific expert ACL to an interface. Use the no command to cancel the application.
expert access-group {id | name} {in | out}
no expert access-group {id | name} {in | out}
Parameters
id
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the ID number of the MAC ACL. This number must be between 6000 and
7999.
Specifies the name of the MAC ACL to be configured. The name can be up to 32
characters long.
Specifies to filter the incoming packets of the interface.
Specifies to filter the outgoing packets of the interface.
None.
Interface Configuration Mode.
Level: 12
Only one MAC ACL can be attached to an ingress physical port or egress physical
port.
Applying or binding an ACL to an interface will fail if there is any criteria statements
that are not supported. An error message "Do not support fields: ..." will be displayed
and all unsupported criteria statements of the ACL type will be listed.
This example shows how to apply a MAC ACL to an interface. The purpose is to
apply the ACL 'ext_mac' attribute to the tenGigabitEthernet 1/0/3 interface, to filter
outgoing packets.
Specifies the ID number of the expert ACL. This number must be between 8000 and
9999.
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents