D-Link DXS-3600-16S Manual page 61

Parameters
default
list-name
method
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#aaa accounting exec list-1 start-stop group radius
DXS-3600-32S(config)#
6-9 accounting exec
This command is used to apply the exec accounting method list to the specified terminal lines in the line configuration
mode. The no form of this command is used to disable the exec accounting function.
accounting exec {default | list-name}
no accounting exec
Parameters
default
list-name
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
When this parameter is used, the following defined method list is used as the default
method for Exec accounting.
Name of the Exec accounting method list. After the user-defined accounting method
list created, you can use accounting exec line configuration command to apply the
accounting method list to the specified terminal lines.
Syntax "{none | group {radius | group_name}}".
Up to four methods supported:
none - Do not perform accounting.
group - Can be followed by radius or a group_name
"group radius" means use all RADIUS servers group
"group group_name" is the specific group created via aaa group server global
configuration command.
The default option is disabled.
Global Configuration Mode.
Level: 15
It enables the exec accounting function after enabling the login authentication.
After enabling the accounting function, it sends the account start information to the
security server when the users log in the NAS CLI, and sends the account stop
information to the security server when the users log out. If it does not send the
account start information to the security server when a user logs in, it does not send
the account stop information to the security server when a user logs out, either.
The configured exec accounting method must be applied to the terminal line that
needs accounting command; otherwise it is ineffective.
This example shows how to perform accounting, of a managed user's activities,
using RADIUS, and sends the accounting messages at the start and the end time of
access. After the 'list-1' accounting method list has been created, you can use the
Accounting EXEC Line Configuration command to apply this method list to the
console, SSH, or to other terminals.
Specifies to use the default method of Exec accounting.
Specifies to use a defined Exec accounting method list.
By default, this feature is disabled.
Line Configuration Mode.
Level: 15
53