D-Link DXS-3600-16S Manual page 186

Example
DXS-3600-32S#configure replace tftp: //10.0.0.66/config.cfg
This will apply all necessary additions and deletions
to replace the current running configuration with the
contents of the specified configuration file, which is
assumed to be a complete configuration, not a partial
configuration. [y/n]:
Accessing tftp://10.0.0.66/config.cfg...
Transmission start...
Transmission finished, file length 45422 bytes.
Executing script file config.cfg ......
Executing done
DXS-3600-32S#
Example
DXS-3600-32S#configure replace ftp: //user:123@10.0.0.66:80/config.cfg force
Accessing ftp: //10.0.0.66/config.cfg...
Transmission start...
Transmission finished, file length 45422 bytes.
Executing script file config.cfg ......
Executing done
DXS-3600-32S#
Example
DXS-3600-32S#configure replace flash: config.cfg force
Executing script file config.cfg ......
Executing done
DXS-3600-32S#
Example
DXS-3600-32S#configure replace default force
Changing current running configuration to default setting ......
Changing done
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to download the 'config.cfg' file from the TFTP server and
replace the current running configuration with it.
y
This example shows how to download the 'config.cfg' file from the FTP server and
replace the current running configuration with it. Execute the command immediately
and not to confirm again.
This example shows how to replace the current running configuration with the
specified configuration file, called 'config.cfg', stored in the NVRAM of the device.
Execute the command immediately and not to confirm again.
This example shows how to reset current running configuration on device to original
state. Execute the command immediately and not to confirm again.
178