D-Link DXS-3600-16S Manual page 66

method
radius
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#aaa accounting network default start-stop group radius
DXS-3600-32S(config)#
6-16 aaa group server
This command is used to configure the AAA server group. The no form of this command is used to delete the server
group.
aaa group server {radius | tacacs+} name
no aaa group server {radius | tacacs+} name
Parameters
name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#aaa group server radius group-1
DXS-3600-32S(config-sg-radius)#
6-17 server
This command is used to add a server to the AAA server group. The no form is used to delete a server.
server ip-addr
no server ip-addr
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Syntax "{none | group {radius | group_name}}".
Up to four methods supported:
none - Specifies not tp perform authorization.
group - Specifies to be followed by radius or a group name.
"group radius" means to use all RADIUS servers group.
"group group_name" means to use a specific RADIUS group, created by means
of the aaa group server radius global configuration command.
Specifies to use the RADIUS group for accounting.
By default, this feature is disabled.
Global Configuration Mode.
Level: 15
It performs accounting of user activities by sending record attributes to the security
server. Use the keyword start-stop to set the user accounting option.
This example shows how to perform the accounting of a network service request,
from users, using RADIUS, and sends accounting messages at the start and the end
time of access.
Enter the name of the server group. It cannot be the keywords "radius" and
"tacacs+".
None.
Global Configuration Mode.
Level: 15
This command is used to configure the AAA server group. Currently, the RADIUS
and TACACS+ server groups are supported.
This example shows how to configure an AAA server group named 'group-1'.
58