D-Link License Management System Commands - D-Link DXS-3600-16S Manual

D-Link License Management System Commands

16-1 install dlms activation_code
This command is used to install an activation code on the switch.
install dlms activation_code AC_STR
Parameters
AC_STR
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#install dlms activation_code xBc7vNWsSpchuQkGZsTfPwcfa
Success.
Please reboot the device to active the license.
DXS-3600-32S#
Example
DXS-3600-32S#install dlms activation_code xBc7vNWsSpchuQkGZsTfPwAcb
Illegal activation code.
DXS-3600-32S#
16-2 show dlms license
This command is used to display the license information on the switch.
show dlms license
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies an activation code. The length should be 25 string characters.
None.
Privileged Mode.
Level: 15
This command is used to install an activation code. The activation code is a set of
codes which actives/ unlocks function on the appliance.
This example shows how to install an activation code on the switch. The field
descriptions are self-explanatory. The following example shows how to install a legal
activation code.
This example shows how to input an illegal activation code.
None.
None.
Privileged Mode.
Level: 3
This command will display the license information on the switch, including the default
license.
225