D-Link DXS-3600-16S Manual page 331

Example
DXS-3600-32S#show lldp local interface tenGigabitEthernet 1/0/1 brief
Interface ID : 1/0/1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
DXS-3600-32S#
32-19 show lldp remote interface
This command is used to display the each physical interface information currently learned from the neighbor.
show lldp remote interface interface-id [, | -] {brief | normal | detail}
Parameters
interface interface-id
,
-
brief
normal
detailed
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display outbound LLDP advertisements for an interface
in brief mode.
Specifies the valid physical interface.
(Optional) Specifies a series of interfaces, or separate a range of interfaces from a
previous range. No space before and after the comma.
(Optional) Specifies a range of interfaces. No space before and after the hyphen.
Displays the information in brief mode.
Displays the information in normal mode. This is the default display mode.
Displays the information in detailed mode.
None.
User EXEC Mode.
Level: 3
This command display the information learned from the neighbor parameters.
: MAC Address
: 00-01-02-03-05-00
: D-Link DXS-3600-32S R1.10.023 P
ort 1 on Unit 1
323