D-Link DXS-3600-16S Manual page 493

48-24 wdrr-queue bandwidth
This command is used to set the queue weight in the WDRR scheduling mode. To restore to the default setting, use the
no form of this command.
wdrr-queue bandwidth weight1...weight8
no wdrr-queue bandwidth
Parameters
weight1...weight8
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#wrr-queue bandwidth 1 2 3 4 5 6 7 8
DXS-3600-32S(config-if)#
48-25 wrr-queue bandwidth
This command is used to set the queue weight in the WRR scheduling mode. To restore to the default setting, use the
no form of this command.
wrr-queue bandwidth weight1...weight8
no wrr-queue bandwidth
Parameters
weight1...weight8
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#wdrr-queue bandwidth 1 2 3 4 5 6 7 8
DXS-3600-32S(config-if)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the weight values per queue in frame length count weighted round-robin
scheduling. weight1 is used for queue 0, weight2 is used for queue 1, and so on.
None.
Global Configuration Mode.
Level: 15
Before running the wdrr-queue bandwidth command, the scheduling mode must
be configured as WDRR mode. If the weight of a queue is set to zero, the scheduling
mode must be 'SP + WDRR', and the queue must be in SP scheduling mode.
This example shows how to configure the queue weight of WDRR scheduling mode.
Specifies the weight values, per queue, used in the frame count weighted round-
robin scheduling method. weight1 is used for queue 0, weight2 is used for queue 1,
and so on.
None.
Global Configuration Mode.
Level: 15
Before running the wrr-queue bandwidth command, the scheduling mode must be
confiugured as WRR mode. If the weight of a queue is configured to zero, the
scheduling mode must be 'SP + WRR', and the queue must be in the SP scheduling
mode.
This example shows how to configure the queue weight of WRR scheduling mode.
485