D-Link DXS-3600-16S Manual page 169

7-95 debug ip bgp
This command is used to turn on the BGP debug function. Use the no form of this command to turn off the BGP debug
function.
debug ip bgp
no debug ip bgp
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp
DXS-3600-32S#
7-96 debug ip bgp fsm-event
This command is used to turn on the BGP FSM event debug switch. Use the no form of this command to turn off the
BGP FSM event debug switch.
debug ip bgp fsm-event
no debug ip bgp fsm-event
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp fsm-event
DXS-3600-32S#
10.1.1.1-Outgoing [FSM] State Change: Idle(1)->Connect(2)
10.1.1.1-Outgoing [FSM] Hold-Timer Expiry.
7-97 debug ip bgp packet
This command is used to turn on BGP packet debug switch. Use the no form of this command to turn off BGP packet
debug switch.
debug ip bgp packet {receive | send}
no debug ip bgp packet {receive | send}
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
By default the BGP debug function is turned off.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on the BGP debug function while the global debug
function has been turned on before.
This example shows how to turn on the BGP debug function.
None.
By default the BGP FSM event debug switch is turned off.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on BGP FSM event debug switch. When BGP FSM event
happens, debug information will be print if BGP debug function is turned on.
Use the command debug ip bgp to turn on BGP debug function.
This example shows how to turn on BGP FSM event debug switch.
161