D-Link DXS-3600-16S Manual page 246

Example
DXS-3600-32S#ls
Directory of flash:
1 -rw- 107389 2000/02/11 21:53:18 config.cfg
2 -rw- 107455 2000/02/12 01:53:01 y
3 -rw- 5081096 2000/02/12 01:54:02 runtime.had
4 d--- 0 2000/02/13 00:04:13 system
126002 KB total (120731 KB free)
DXS-3600-32S#
20-3 cp
This command is used to copy a file to the specified file or directory.
cp dest {destine_file | directory} sour source_file
cp sour source_file dest {destine_file | directory}
Parameters
directory
destine_file
source_file
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#cp sour runtime.had dest tmp/runtime.had
DXS-3600-32S#
20-4 cd
This command is used to enter the specified directory.
cd directory
Parameters
directory
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to show the information of all files in the current directory.
Specifies the destination file or directory.
Specifies the destination file.
Specifies the name of the file to copy (including the path).
None.
Privileged EXEC Mode.
Level: 2
Copy the specified file to a new file or a directory. If the file already exists, the system
will prompt whether to overwrite to cancel the operation.
This example shows how to copy the runtime.had in the directory 'tmp' with name
runtime.had.
(Optional) Specifies the path of the directory.
None.
Privileged EXEC Mode.
Level: 2
238