D-Link DXS-3600-16S Manual page 43

Example
DXS-3600-32S#show ipv6 traffic-filter
Interface tenGigabitEthernet 1/0/2:
ipv6 access-group ipv6-11 in
ipv6 access-group ipv6-1 out
DXS-3600-32S#
3-21 show mac access-group
This command is used to display the MAC ACL configuration of the interface.
show mac access-group [interface interface]
Parameters
interface interface
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mac access-group
Interface tenGigabitEthernet 1/0/11:
mac access-group 6005 in
mac access-group ext-mac-6000 out
DXS-3600-32S#
3-22 show expert access-group
This command is used to display the expert ACL configuration of the interface.
show expert access-group [interface interface]
Parameters
interface interface
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the IPv6 ACL, applied to the interface.
Specifies the interface ID used.
None.
EXEC Mode.
Level: 1
Displays the MAC ACL applied to the interface. If no interface is specified, the MAC
ACLs applied to all the interfaces will be displayed.
This example shows how to display the MAC ACL, applied to the interface.
Specifies the interface ID used.
None.
EXEC Mode.
Level: 1
Displays the expert ACL applied to the interface. If no interface is specified, the
expert ACLs applied to all the interfaces will be displayed.
35