D-Link DXS-3600-16S Manual page 282

Display Parameters
IGMP Snooping Global State Specify IGMP Snooping global state. Use the ip igmp snooping command, in the
Dynamic Mrouter Aging Time Specify IGMP Snooping dynamically learned multicast router interface aging out
IGMP Snooping State
Fast Leave
Querier State
Version
Query Interval
Max Response Time
24-12 show ip igmp snooping querier
This command is used to display IGMP Snooping querier electing information.
show ip igmp snooping querier [vlan VLAN-ID]
Parameters
VLAN-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip igmp snooping querier
VLAN #1
Querier Role
Querier IP
Querier Expiry Time
DXS-3600-32S#
Example
DXS-3600-32S#show ip igmp snooping querier vlan 1
VLAN #1
Querier Role
Querier IP
Querier Expiry Time
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
global configuration mode, to configure this state.
time, as specified with command ip igmp snooping dyn-mr-aging-time.
Specify IGMP Snooping VLAN state, as specified with the ip igmp snooping
command in interface configuration mode.
Specify IGMP Snooping fast-leave state, as specified with the ip igmp snooping
fast-leave command.
Specify IGMP Snooping querier state, as specified with the ip igmp snooping
querier command.
Specify the IGMP Snooping version.
Specify the IGMP Snooping query interval which is configured by command ip igmp
snooping query-interval.
Indicates the max response time which is configured by command ip igmp
snooping max-response-time.
Specifies the VLAN ID. Display the specified VLAN information.
None.
Privileged EXEC Mode.
Level: 3
Use this command to check the IGMP Snooping querier electing information. If no
parameter is added, this command will display querier information on all VLANs.
This example shows how to display querier information for all VLANs.
: Non-Querier
: 0.0.0.0
: -
This example shows how to display querier information for VLAN 1.
: Non-Querier
: 0.0.0.0
: -
274