D-Link DXS-3600-16S Manual page 139

Display Parameters
Gateway
Metric
LocPrf
Weight
Path
7-76 show ip bgp confederation
This command is used to display the confederation configuration of BGP.
show ip bgp confederation
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp confederation
BGP AS Number
Confederation Identifier
Confederation Peer
Neighbor List:
IP Address
---------------
10.1.1.1
172.18.1.1
192.168.1.1
DXS-3600-32S#
Display Parameters
BGP AS Number
Confederation Identifier
Confederation Peer
Neighbor List
IP Address
Remote AS Number
7-77 show ip bgp dampening dampened-paths
This command is used to display routes that were dampened by BGP.
show ip bgp dampening dampened-paths [vrf VRF-NAME]
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
IP address of the next router that is used when forwarding a packet to the destination
network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to
this network.
If shown, this is the value of the inter-autonomous system metric. This field is
frequently not used.
Local preference value as set with the set local-preference route-map
configuration command. The default value is 100.
Weight of the route as set via autonomous system filters.
Autonomous system paths to the destination network.
None.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to display the detail of the confederation configured.
This example shows how to show the current settings of confederation.
: 200
: 10
: 201, 202
Remote AS Number
--------------------
200
201
202
Description
Indicates the AS number of the local BGP.
Indicates the confederation Identifier of the local BGP.
Indicates the sub-AS numbers in the same confederation.
List all the neighbors in the local BGP router.
Indicates the IP address of the neighbors.
AS number of the neighbor.
131