Show Radius Statistics - D-Link DXS-3600-16S Manual

Parameters
seconds
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#radius-server timeout 10
DXS-3600-32S(config)#

50-5 show radius statistics

This command is used to display the RADIUS statistics for accounting and authentication packets.
show radius statistics
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show radius statistics
RADIUS Server: 192.168.12.1: Auth-Port 1812, Acct-Port 1813
Round Trip Time:
Access Requests:
Access Accepts:
Access Rejects:
Access Challenges:
Acct Request:
Acct Response:
Retransmissions:
Malformed Responses:
Bad Authenticators:
Pending Requests:
Timeouts:
Unknown Types:
Packets Dropped:
DXS-3600-32S#
Display Parameters
Auth.
Acct.
Round Trip Time
Access Requests
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the timeout value in the range of 1 to 1000 seconds.
5 seconds.
Global Configuration Mode.
Level: 15
Use this command to change the timeout of packet retransmission.
This example shows how to set the timeout to 10 seconds.
None.
None.
Privileged EXEC Mode.
Level: 15
Use this command to show all RADIUS statistics.
This example shows the output for the show radius statistics command.
Auth. Acct.
0 0
0 NA
0 NA
0 NA
0 NA
NA 0
NA 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Description
Statistics for authentication packets.
Statistics for accounting packets.
The time interval (in hundredths of a second) between the most recent Response
and the Request that matched it from this RADIUS server.
The number of RADIUS Access-Request packets sent to this server. This does not
include retransmissions.
499