D-Link DXS-3600-16S Manual page 200

12-3 copy error-log
This command is used to copy error log information to a location filename through TFTP.
copy error-log tftp [//location/filename]
Parameters
tftp
location
filename
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#copy error-log tftp //10.0.0.90/error-log.txt
DXS-3600-32S(config)#
12-4 copy debug buffer
This command is used to copy debug buffer information to a location filename through a TFTP.
copy debug buffer tftp [//location/filename]
Parameters
tftp
location
filename
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#copy debug buffer tftp //10.0.0.90/debug.txt
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to upload the error log through a TFTP server.
Specifies the location of the TFTP server.
Specifies the location filename of the upload error log.
None.
Global Configuration Mode.
Level: 15
The user can use the copy error-log command to copy the error log information
through TFTP to a location file.
This example shows how to copy error log information through a TFTP to a file name
'err-log.txt' at 10.0.0.90
Specifies to upload the debug buffer information through a TFTP server.
Specifies the location of the TFTP server.
Specifies the location filename of the debug buffer information.
None.
Global Configuration Mode.
Level: 15
The user can use the copy debug buffer command to copy the debug buffer
information through TFTP to a location file.
This example shows how to copy debug buffer information through TFTP to a file
name "debug.txt" to 10.0.0.90
192