D-Link DXS-3600-16S Manual page 103

neighbor {IP-ADDRESS | PEER-GROUP-NAME} description DESC
no neighbor {IP-ADDRESS | PEER-GROUP-NAME} description
Parameters
IP-ADDRESS
PEER-GROUP-NAME
DESC
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#router bgp 65100
DXS-3600-32S(config-router)#neighbor 172.16.10.10 remote-as 65101
DXS-3600-32S(config-router)#neighbor 172.16.10.10 description ABC in Taiwan
DXS-3600-32S(config-router)#
7-42 neighbor ebgp-multihop
This command is used to set the TTL value of BGP connections to external peers or peer-groups that are not directly
connected. Use the no form of this command to return to the default.
neighbor {IP-ADDRESS | PEER-GROUP-NAME} ebgp-multihop [NUMBER]
no neighbor {IP-ADDRESS | PEER-GROUP-NAME} ebgp-multihop
Parameters
IP-ADDRESS
PEER-GROUP-NAME
NUMBER
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the IP address of the BGP peer.
Specifies the name of a Border Gateway Protocol (BGP) peer group. The maximum
length is 16 characters.
Specifies a descriptive string for the neighbor. The maximum length is 80 characters.
The syntax is general string that allows space.
There is no description.
Router Configuration Mode.
Address Family Configuration Mode (VRF).
Level: 8. (EI Mode Only Command)
If you specify a BGP peer group by using the PEER-GROUP-NAME argument, all
the members of the peer group will inherit the characteristic (description) configured
with this command.
Use the show ip bgp neighbors or show ip bgp peer-group command to verify
your settings.
This example shows how to configure a description for the neighbor 172.16.10.10.
Specifies the IP address of the BGP peer.
Specifies the name of a Border Gateway Protocol (BGP) peer group. The maximum
length is 16 characters.
(Optional) Specifies the TTL value, range from 1 to 255. If it is not specified, the
value is 255.
By default, the hop value for EBGP neighbor is 1.
Router Configuration Mode.
Address Family Configuration Mode (VRF).
Level: 8. (EI Mode Only Command)
95