D-Link DXS-3600-16S Manual page 584

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#storm-control interval 5
Success
DXS-3600-32S(config)#
58-4 show storm-control
This command is used to display storm suppression information.
show storm-control [interface interface-id] [broadcast | multicast | unicast]
Parameters
interface interface-id
broadcast
multicast
unicast
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to set the interval time 5s.
(Optional) Specifies a port to display storm-control information
(Optional) Displays storm-control information for broadcast packets
(Optional) Displays storm-control information for multicast packets
(Optional) Displays storm-control information for unicast packets
None.
Privileged EXEC Mode.
Level: 15
If you do not specify a port, display all the ports of one traffic type.
If you do not specify a traffic type, display broadcast storm control.
576