D-Link DXS-3600-16S Manual page 501

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Example
DXS-3600-32S#show qcn cnpv
Dot1p
Defense
Priority Mode Choice Mode
-------- ----------- -------------- --------- -----------
1
admin
2
auto
DXS-3600-32S#
Example
DXS-3600-32S#show qcn cnpv status
QCN Status
QCN Discarded Frames
CNM Transmit Priority
CNPV: 1
------------------------------
Auto Alternate Priority : 0
Errored Portlist
CNPV: 2
------------------------------
Auto Alternate Priority : 0
Errored Portlist
!---Output Truncated.
DXS-3600-32S#
49-8 show qcn cnpv interface
This command is used to display the QCN configuration and status for each Congestion Notification Priority Value
(CNPV).
show qcn cnpv PRIORIT-VALUE [, | -] interface [INTERFACE-ID [, | -]] [simple]
Parameters
PRIORIT-VALUE [, | -]
INTERFACE-ID [, | -]
simple
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the QCN CNPV settings.
Admin Defense
Alternate CP
Priority
interior
0
interior-ready
0
This example shows how to display the total discarded frames, auto alternate priority
and error portlist for all CNPVs.
: Enabled
: 1234
: 1
: ---
: ---
Specifies the priority value to display in the configuration and status. The valid
priority value range is 0 to 7. You can specify multiple priority values, which are
separated by "," or "–".
(Optional) Specifies the interface to display QCN CNPV information. Valid interfaces
are physical interfaces. You can specify multiple interfaces, which are separated by
"," or "–". Otherwise, display the CNPV configuration and status for all physical
interfaces.
(Optional) Specifies to only display the CND defense mode which would operate for
the CNPV as determined by the LLDP Congestion Notification TLV.
None.
EXEC Mode.
Level: 3.
Use this command to display the QCN per priority or interface configuration and the
status. Use this command with the simple option to display the CND defense mode
controlled by the LLDP Congestion Notification TLV.
Creation
enable
disable
493

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents