Rmon Alarm - D-Link DXS-3600-16S Manual

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#rmon collection history 100
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#no rmon collection history 100
DXS-3600-32S(config-if)#

51-3 rmon alarm

This command is used to add an alarm entry. Use the no form of this command to remove an alarm entry.
rmon alarm number variable interval {absolute | delta} rising-threshold value [event-number] falling-threshold
value [event-number] [owner ownername]
no rmon alarm number
Parameters
number
variable
interval
absolute
delta
value
event-number
owner ownername
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#rmon alarm 100 1.3.6.1.2.1.16.1.1.1.14.1 30 delta rising-threshold 10000
100 falling-threshold 1000 200 owner test
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Interface Configuration Mode.
Level: 12
At the present, this switch supports only the records of Ethernet. Add an RMON
history statistic for the specified interface on the switch.
This example shows how to add a history entry.
This example shows how to remove a history entry.
Specifies the alarm index in the range of 1 to 65535.
Specifies the variable to be monitored by the alarm (in integer).
Specifies the sampling interval in the range of 1 to 2147483647.
Specifies each sampling value compared with the upper and lower limits.
Specifies the difference with previous sampling value compared with the upper and
lower limits.
Specifies the upper and lower limits.
Specifies that when the value exceeds the upper or lower limit, the event with the
index of Event-number will be triggered.
Specifies the string that describes the owner name information. The maximum length
is 127 characters (please refer to RFC1213 for the maximum length in detail).
None.
Global Configuration Mode.
Level: 12
Add the RMON alarm information on the switch.
This example shows how to add an alarm entry.
503