D-Link DXS-3600-16S Manual page 163

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Example
DXS-3600-32S#show ip bgp quote-regexp "100"
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
IP Address/Netmask
s
172.16.0.0/24
s
172.16.0.0/24
*
172.16.1.0/24
*
172.16.11.0/24
*
172.16.14.0/24
*
172.16.15.0/24
*
172.16.16.0/24
DXS-3600-32S#
Example
DXS-3600-32S#show ip bgp quote-regexp vrf 100 "20"
BGP Local Router ID is 11.11.11.11
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask
Route Distinguisher: 1:100 (default for VRF 100)
*i 56.1.0.0/16
*i 56.1.1.0/24
*i 56.1.2.0/24
*i 56.1.3.0/24
DXS-3600-32S#
Display Parameters
BGP Local Router ID
Status codes
Origin codes
IP Address/Netmask
Gateway
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output from the show ip bgp quote-regexp command, in
privileged mode.
Gateway
Metric LocPrf
172.16.72.30
0
172.16.72.30
0
172.16.72.30
0
172.16.72.30
0
172.16.72.30
0
172.16.72.30
0
172.16.72.30
0
The following example displays routes which contains the AS number 20 in VRF
100.
Gateway
33.33.33.33
33.33.33.33
33.33.33.33
33.33.33.33
Description
The router identifier of the local BGP router.
Status of the table entry displayed at the beginning of each line. It can be one or
more of the following values:
s - The table entry is suppressed.
d - The table entry is damped.
h - The table entry is damped and has been withdrawn by the neighbor.
* - The table entry is valid.
> - The table entry is the best entry to use for that network.
i - The table entry was learned via an internal BGP (iBGP) session.
Origin of the table entry displayed at the end of each line. It can be one of the
following values:
i - Entry originated from an Interior Gateway Protocol (IGP) and was advertised
with a network router configuration command.
e - Entry originated from an Exterior Gateway Protocol (EGP).
? - Origin of the path is not clear. Usually, this is a router that is redistributed into
BGP from an IGP.
IP prefix with its mask length of the entry.
IP address of the next router that is used when forwarding a packet to the destination
network. An entry of 0.0.0.0 indicates that the router has some non-BGP routes to
this network.
Weight
Path
100
108
?
100
108
?
100
108
?
100
108
?
100
108
?
100
108
?
100
108
?
Metric
LocPrf
0
100
0
100
0
100
0
100
155
Weight
Path
0
20
i
0
20
i
0
20
i
0
20
i

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents