D-Link DXS-3600-16S Manual page 417

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf lsa-flooding
DXS-3600-32S#
Received LSA type 1 id 2.2.2.2 from nbr 2.2.2.2 in area 0.0.0.0 seq 80000001 csum fe3a tic 15
Flood LSAs in area 0.0.0.0 tic 15
40-36 debug ip ospf packet-receiving
This command is used to turn on the OSPF packet receiving debug switch. Use the no form of the command to turn off
the OSPF packet receiving debug switch.
debug ip ospf packet-receiving
no debug ip ospf packet-receiving
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf packet-receiving
DXS-3600-32S#
Received a Hello packet from addr 10.1.1.2 at interface System tic 100
Received a Hello packet from addr 100.1.1.2 at interface ip100 tic 102
40-37 debug ip ospf packet-transmitting
This command is used to turn on the OSPF packet transmitting debug switch. Use the no form of the command to turn
off the OSPF packet transmitting debug switch.
debug ip ospf packet-transmitting
no debug ip ospf packet-transmitting
Parameters
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
By default, the OSPF LSA flooding debug switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF LSA flooding debug switch. When
LSA is received, added into local database or flooded to neighboring router, the
debug information will be print if OSPF debug function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF LSA flooding debug switch.
None.
By default, the OSPF packet receiving debug switch is turned off.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off OSPF packet receiving debug switch. When
one OSPF protocol packet is received, the debug information will be print if OSPF
debug function is turned on.
Use the command debug ip ospf to turn on the OSPF debug function.
This example shows how to turn on the OSPF packet receiving debug switch.
None.
By default, the OSPF packet transmitting debug switch is turned off.
Privileged EXEC Mode.
409