D-Link DXS-3600-16S Manual page 224

show ip dhcp excluded-address [vrf vrf-name]
Parameters
vrf vrf-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip dhcp excluded-address
Index Begin Address
----- ---------------
1 192.168.0.1
2 10.10.10.10
Total Entries : 2
DXS-3600-32S#
Display Parameters
Index
Begin Address
End Address
VRF
14-20 show ip dhcp binding
This command is used to show the binding condition of the DHCP address.
show ip dhcp binding [vrf vrf-name] [ip-address]
Parameters
vrf vrf-name
ip-address
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the name of a VRF instance.
None.
Privileged Mode.
Level: 2
This command is used to display the groups of IP addresses which are excluded
from the legal assigned IP address.
This example shows how to display the group of IP addresses that are excluded
from the legal assigned IP address.
End Address
---------------
192.168.0.100
10.10.10.10
Description
List the index numbers.
Lists the beginning addresses.
Lists the ending addresses.
VRFs configured on the DHCP server.
(Optional) Specifies the name of a VRF instance.
(Optional) Specifies to only show the binding condition of the specified IP addresses.
None.
Privileged Mode.
Level: 2
If the IP address is not defined, show the binding condition of all addresses. If the IP
address is defined, show the binding condition of this IP address.
216