Show Mpls Ldp Interface - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show mpls ldp parameter
LSR ID
LDP Version
LDP State
TCP Port
UDP Port
Max PDU Length
Max Backoff
Transport Address
Keep Alive Time
LSP Control Mode
Label Retention
Loop Detection
Path Vector Limit
Hop Count Limit
Authentication
PHP
Trap Status
DXS-3600-32S#

38-32 show mpls ldp interface

This command is used to display LDP interface information.
show mpls ldp interface [INTERFACE-ID]
Parameters
INTERFACE-ID
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display LDP global information.
: 172.18.1.1:0
: 1.0
: Enabled
: 646
: 646
: 1500
: 600 Seconds
: 172.18.1.1
: 40 Seconds
: Independent
: Liberal
: Enabled
: 255
: 255
: Enabled
: Implicit null
: Enabled
(Optional) Specifies the interface that will displayed. If no interface is specified,
display all interfaces' information.
None.
EXEC Mode.
Level: 3.
This command is used to display LDP interface information.
362