D-Link DXS-3600-16S Manual page 145

Display Parameters
LocPrf
Weight
Path
7-81 show ip bgp inconsistent-as
This command is used to display the routes which have the same prefix and different AS path origins.
show ip bgp inconsistent-as [{all | rd ASN:NN | vrf VRF-NAME}]
Parameters
all
rd ASN:NN
vrf VRF-NAME
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip bgp inconsistent-as
BGP Local Router ID is 10.90.90.10
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
IP Address/Netmask
* 40.58.0.0/16
*>i
* 40.59.0.0/16
*>i
* 40.60.0.0/16
*>i
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Local preference value as set with the set local-preference route-map configuration
command. The default value is 100.
Weight of the route as set via autonomous system filters.
Autonomous system paths to the destination network.
(Optional) Specifies to display routes of all VPN and VRFs.
(Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
This command displays the routes which have inconsistent-as originating
autonomous systems.
This example shows the output from the show ip bgp inconsistent-as command, in
privileged mode.
Gateway
103.1.10.1
20.1.1.1
103.1.10.1
20.1.1.1
103.1.10.1
20.1.1.1
Metric LocPrf
0
0 100
0
0 100
0
0 100
137
Weight Path
0 200 i
0 i
0 200 i
0 i
0 200 i
0 i