D-Link DXS-3600-16S Manual page 178

Parameters
vrf VRF-NAME
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp show redistribution
Redistributed routes summary:
Network
-------
10.0.0.0/8
21.0.0.0/24
21.0.1.0/24
21.0.2.0/24
21.0.3.0/24
21.0.4.0/24
Total Entries: 6
Redist list information:
No redist list exist!
DXS-3600-32S#
7-109 debug ip bgp show as-path-access-list
This command is used to show internal detailed information about the BGP path access list.
debug ip bgp show as-path-access-list
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip bgp show as-path-access-list
BGP AS Path Access List 1
deny (_64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_)
permit 33
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
None.
Privileged Mode.
Level: 15. (EI Mode Only Command)
Use this command to check internal status and detailed information of BGP route
redistribution.
This example shows how to display internal detailed information about BGP route
redistribution.
Type Next_hop
---- -------------
LOCAL 0.0.0.0
RIP 10.2.2.2
RIP 10.2.2.2
RIP 10.2.2.2
RIP 10.2.2.2
RIP 10.2.2.2
None.
None.
Privileged Mode.
Level: 15. (EI Mode Only Command)
This command is used to show internal detailed information about the BGP path
access list.
This example shows how to display internal detailed information about the BGP path
access list.
170